Showing posts with label fisheye. Show all posts
Showing posts with label fisheye. Show all posts

Saturday, March 13, 2021

Most fun camera lens

Fujifilm X-E3 with the Pergear 10mm pancake fisheye lens

I wasn't expecting much from the Pergear 10mm fisheye lens. After all, at US$79 this was hardly the most expensive lens I had ever brought. Looking at the specs, the Pergear might seem to be everything a lens shouldn't be. It's not a very wide fisheye (only 150 degree field of view), it's a fixed aperture at a paltry f8, and it's a manual focus, via a dinky little lever on the bottom of the lens. But, despite these less than inspiring features, once I started shooting with the Pergear, I quickly fell in love.
Put the horizon low or high and the fisheye effect appears.

Firstly, it's fun, as fisheye lenses tend to be, but more useful fun than my 8mm Samyang. At 8mm, the Samyang is an 'in-your-face' fisheye that can become a bit overbearing after a while. The 10mm of the Pergear still gives a good fisheye effect if used deliberately as a fisheye, but is mild enough to disguise or even remove completely in post - so the lens can also be used as a very wide rectilinear lens (just don't shoot any architecture with it!). It's wide enough to be fun when used for street photography too - hanging at your side on the end of an arm it's hard to miss a shot as people pass you on the street - its an unusual perspective that can create some eye-catching shots.
Thigh-level shooting

The fixed f8 aperture isn't going to create any bokeh. But f8 is less of an issue than I first thought. ISO is your friend here - set it to the conditions, let the camera choose the shutter speed and all you have to worry about is composition and timing. I even took it out after sundown on an overcast evening, shooting handheld at ISOs up to 12,800 and speeds down to 1/4 sec. Anything slower than that would need a tripod (no image stabilisation here), but I was still impressed with the results.
After sundown, ISO 3200, 1/28 sec.

The focus is brilliant - in use, you just leave the lens set on infinity. At that setting, everything is in focus from infinity to less than one metre. Unlike other lenses, infinity on the Pergear doesn't mean it's focused AT infinity; it actually seems to be focused at some lesser hyperfocal distance that includes infinity. As soon as you move the lever off the infinity mark, distant objects become out of focus. Swing the lever across to 0.3 meters and you can get pretty close to things, but don't expect anything further out than 1 meter to be in focus.
As sharp as - from the nearest post to the horizon (no focus stacking here!)

Here are a few other things to expect with this lens:
Distortion: quite a bit (it's a fisheye!)
Sharpness: very good from the centre out to the corners
Chromatic aberration: little to none (I've not found any yet)
Flare: almost none, though the sun in, or just out, of the frame produces some nice rainbow light rays.
Two sets of rays and some rainbow effects, with the sun just out of frame.

For the money, a great little lens that will probably be much more useful than you might think and much more fun than it's round, black, face suggests.
So much fun, I expected it to wink.




Sunday, May 6, 2012

Up-size me, please


Today, I have been playing around with some old reject images as test subjects. My issue was, 'how to print at large sizes (say 1m wide) when you only have a camera with a 10Mega-pixel sensor? To print with good quality at 1m width would requires an image about 50Mp in size - larger than the new Nikon D800 and well into the outrageously expensive medium format digital category. However, Mp is a square measure and, while the long edge of my 10Mp sensor is 3,872px, a 50Mp sensor would be about 8,640px - only a 2.2x linear increase.

Conventional wisdom (and my own prior experience) says that you can't increase an image by 220% and get good quality (even using professional re-sizing tools)  but today I tried some other techniques and came up with a solution that provides good sharpness and smooth detail without obvious artifacting. Even with my perfectionist, pixel peeping, ways I would be hard pressed to detect the up-sizing, if I didn't know. Basically, after cleaning the image of any digital noise, a standard "bicubic smoother" upsize, followed by a pass through Topaz 'In focus' and a light touch with Topaz 'Detail', provides a large image file that I am happy to work with.

Of course this web picture is not 1m wide, so you can't see the results, but if you are a Topaz user you can try for yourself and see what results you get. This is not something to be applied at the end of the processing - it is something to do at the start, so that you have a large digital file entering the normal post-processing cycle. done this way, you can still provide some additional output sharpening using whatever tool you prefer at the end.

Anyway, re-sizing aside, this image had quite grown on me by the time I had finished. :-)

Saturday, March 24, 2012

Fractals as texture

As a casual diversion from photography, I sometimes dabble in fractal art. Occasionally a fractal makes it into a photograph as a background to a portrait, but recently I have been toying with fractals as texture. Let me demonstrate:

I'll use the fractal below. It's shown here on a black background so it can be seen easily, but the actual fractal was brought into the photo file as a transparent png (no black). This fractal is suitable because (a) it is soft and lacking in hard edged definition (b) it has a nice warm color.
The image I will use is a straightforward church interior with lots of wood that will go nicely with the warm tones of the fractal image.
The settings used for the texture layer were mode=overlay and opacity about 50%, settings which produced this final picture:
Apologies that the last picture is smaller (Blogger changes it to the original if I try to make it any larger!) What I like about this approach is that it replaces a warming filter, the different shades in the fractal give very subtle changes in luminosity that make the picture more three dimensional, and while its effects are quite visible the fractal its self isn't.

The fractal was generated in Apothysis 7x (a freeware program) and picked out of a randomly generated batch (i.e. no skill whatsoever required :-)


Friday, March 9, 2012

All around view

It's been a week of experiments with interactive 360 degree photography. It started with a client wanting a 360 degree view of their retail space and ended up with visiting St Michael and All Angels church to see what could be done with a larger interior. The results can be seen at http://www.fords.co.nz/pano/stmichael/start.html. If you do try the link, use the 'full screen' button to see it at large scale; well worth it.

The interior was taken with six fish-eye frames - 5 horizontal and 1vertically upward. I could have taken a seventh vertically downward but didn't bother this time so there is a small black hole in the floor underneath the camera! The six pictures were stitched using 'Hugin' and the virtual reality files were created using 'Pano2VR'.

The resulting image files are quite large to download but the additional quality for zooming in on detail is worth the short wait. The image will display in a browser using either 'Flash' or 'HTML5' if Flash isn't available. Comments welcome.

Friday, January 27, 2012

Moeraki Boulders

A monochrome picture of the boulders at Moeraki.
Nikon D80, 8mm fisheye, ISO 200, 1/250 sec at f11.
A full-sized version of this picture is also available for sale as a print or greeting card at: http://www.redbubble.com/people/phoxford/works/8392596-moeraki-boulders

Sunday, January 15, 2012

Tug Luttelton

Last one from the Lyttelton set. This one is available from Redbubble as a greeting card or as a larger print. Go to http://www.redbubble.com/people/phoxford/works/8339970-tug-lyttelton.
Nikon D80, 8mm fisheye, f11 2 1/125 sec (3 brackets) ISO 200.
Next it's boulders and penguins. Stay tuned.

Friday, January 13, 2012

Tugboat Lyttelton

Two more pictures from yesterday's "Lyttelton" set. Both of the Tugboat Lyttelton, both using an 8mm fisheye lens. Both of these pictures have had some of the fisheye distortion (vertical lines) corrected with the programme 'Fisheye Hemi'. This is a very useful tool to have if you still wan't to have a wide field of view but with slightly less of the fisheye effect.

Nikon D80, 8mm fisheye, f11 @ 1/125 sec (3 exposures blended), ISO 200.

Thursday, January 12, 2012

Fish out of water

It's so hard to resist the 'fish' puns but I will try to cut back. Anyway, first real outing with the fisheye today, in one of my favourite haunts - the Port of Lyttelton. I am liking the way that one can create these lovely curved 'leading lines' with the fisheye. In this shot the camera was pointing downward leading to a significantly bowed horizon line. A similar shot from the same place but with the camera leveled seemed to loose much of the dynamism created by the curved lines.
Nikon D80, 8mm fisheye, f11, 1/125, three exposures, tinted black and white.

Wednesday, January 11, 2012

Fish on the book

I figure that I'll keep the fisheye on the camera for a while yet. Normally I would use a 50mm prime at about f2 for a shot like this (indoor, available light, portrait) keeping the fisheye on the camera is forcing me to see things fresh. In this shot, I like the way that the fisheye has made the book completely fill the foreground and provide some interesting 'leading lines' to the main subject. Can't do that with a 50mm.

Tuesday, January 10, 2012

Fish on the floor!

Getting the fish down on the floor just got a lot easier thanks to a right-angled viewfinder attachment - an excellent aid for older bones! I like the way the fisheye enables you to get right close into the action and the distortion is a great compliment to highlighting the 'fun' aspect of grandchildren:
Nikon D80, 8mm fisheye, f5.6 @ 1/30 sec, ISO 200.

Monday, January 9, 2012

Observations on the fish


If I thought that using a fisheye lens was simply a case of, “it’s just another lens,” then I was mistaken. There are, it seems, new compositional factors to discover and learn and there are technical challenges to address. The compositional aspects I am still working through, but one technical aspect is that, in an outdoor environment, almost every shot will have a high dynamic range and will need to be treated with whatever technique you use for HDR.
The reason for the high dynamic range is the field of view; it is so large that the chances of including both very bright and very dark parts in the subject are greatly increased – even compared to something like a 10mm rectilinear lens. To combat this, I have found that +2/-2 bracketed shooting is the new ‘normal’ for the fisheye and that in some cases I need to bracket out to +4/-4 or further, to cover the range.
The following shot of our school observatory was taken on a cloudy/bright day, facing away from the sun and required a +2/-2 treatment. With other shots taken towards the cloud covered sun, +2/-2 was not enough and the sky was badly burnt out.

Nikon D80, with Samyang 8mm fisheye, f11 (3 exposures).

Friday, January 6, 2012

Gone fishin'



Yesterday, my long awaited fisheye lens arrived so I strapped it on and went out to the yard. The family car proved that not all subjects are well suited to a fisheye – unless amusement is your aim!









But the front wheel of the kick-bike showed that some subjects can be kept in shape while the rest of the world is bending crazily.
A walk down the road to the cricket oval quickly demonstrated the wonderful new perspective that a fisheye can bring to a landscape. It also demonstrated how the sun can quickly lead to burnt out highlights – this shot would have benefited from a wider, bracketed, exposure.

OK, there’s nothing ‘artsy’ here yet, just some demo shots to show what the lens can do - the lens in question being the Korean Samyang 8mm fisheye. It’s rebadged by a number of companies and mine came dressed in “Bower” clothing, though I believe it’s often seen as a “Rokinon” or a “Vivitar” and probably a few other names as well.  In the USA these sell for well under $300 dollars so, even after importation costs, it is still a third of the cost of a ‘name’ brand fisheye lens.

Part of the low cost is the fact that it is a manual focus and f stop lens – no autofocus and no auto exposure. But with a fisheye these are less of an issue than you might think. Stopped down to f8 the depth of field is so impressive that I just set it to 3m and left it there. And exposure calculations took me back to the days before I even owned a light meter – just look at the sky and guess that today is (for example) an f11 at 1/125 sec day. Even from my first outing I had less exposure errors with this lens than I usually get with the TTL metering – all due to the huge field of view where its averages, not spot metering that count.

But is it sharp? Yes, it’s sharp even at the edges from about f5.6 onwards. At f3.5 there is some softness at the periphery, but no more than I have seen with some zoom lenses. For a fisheye the sharpness is very impressive. If you are looking at a fisheye lens then I can highly recommend this one available at: http://www.bhphotovideo.com/c/product/635177-REG/Bower_SLY358N_SLY_358N_8mm_f_3_5.html  or at: http://www.amazon.com/Rokinon-FE8M-N-Fisheye-Nikon-Black/dp/B002LTWDSK/ref=sr_1_1?s=photo&ie=UTF8&qid=1325835494&sr=1-1